Seria LR - Single-shaft shredders
The LR series manufactured by UNTHA has been specially designed for shredding wood and wood products and is used in wood-processing factories.
Modele: LR630, LR700, LR1000 / LR1400.
Seria RS 30 - Four-shaft shredders
The four-shaft shredders in this series can be supplied with three different driving powers. The numerous cutter and screen variants, allow the shredder to be used for a wide range of applications.
Model: RS30-450.
Seria RS 40 - Four-shaft shredders
Larger cutter clearances and significantly higher driving powers. A broad range of cutters is available and can be combined with different versions of the perforated screen for specific tasks.
Modele: RS40-450, RS40-480, RS40-750, RS40-960.
Horizontally Fed Disc Chippers
When chipping roundwood longer than 1.5 m, the disc chipper with horizontal infeed gives the best yield. The chips can be blown via a chip tube to a cyclone or discharged through the chipper bottom for smoother handling.
Gravity Fed Disc Chippers
BRUKS disc chippers with drop feed are primarily intended for chipping of roundwood shorter than 1.5 meters. The wood is fed in through an inclined feed chute, and the chips can be either blown out via a chip tube or discharged through the chipper bottom.
Disc chippers with infeed system
The traditional „M-Chipper“ is a disc chipper with slanted disc, horizontal feeding and load-control led feed works. Most suitable for...
Drum chippers with infeed system
The wide infeed opening of these horizontally fed chippers is advantageous when processing edgings, slabs, reject boards and veneer mill residue. The...
Large drum chippers with infeed system
The extremely wide infeed openings and large drum diameters of these giants allow the production of highest-quality chips from log diameters up to 1200 mm.
Drum chippers with drop feed
Gravity-fed drum chippers are suitable for chipping short sawmill and joinery waste. They can also be used in log yards for lilly pads and short log ends...
High capacity drum chippers with drop feed
Drop-fed chippers in heavy-duty design for the production of high-quality pulp chips from short wood waste and short logs. Easily replaceable wear parts on...
